Release notes✎
What changed in each version, newest first.
What changed, and what it changes for you. An entry earns its place by altering what a reader would do — a refactor with no visible effect is not here.
The Performance panel profiles the frame stage by stage, on any device.
Releases
- 1.1.0-canary.29The Place Editor is 0.22.0: DoubleSided MeshParts, and Roswaal Benchmark 4.New2026-11-22
- 1.1.0-canary.28The Place Editor is 0.21.0: Occlusion culling starts off on Apple's GPUs, and a benchmark's second pass is its warm pass.New2026-11-22
- 1.1.0-canary.27The Place Editor is 0.20.0: a benchmark A/B of one render switch, and mipmapped Decals and Textures.New2026-11-22
- 1.1.0-canary.26The Place Editor is 0.19.0: Roswaal Benchmark 3, with real models and textures.New2026-11-22
- 1.1.0-canary.25The Place Editor is 0.18.1: Benchmark 2 reads times between a coarse clock's steps.New2026-11-22
- 1.1.0-canary.24The Place Editor is 0.18.0: Roswaal Benchmark 2, which times its scenes with the GPU kept busy.New2026-11-22
- 1.1.0-canary.23The Place Editor is 0.17.1: a benchmark comparison calls a change only past three deviations of the noise.New2026-11-22
- 1.1.0-canary.22The Place Editor is 0.17.0: benchmark runs compared, with the drift between them taken out and the noise said.New2026-11-22
- 1.1.0-canary.21The Place Editor is 0.16.1: a Highlight's outline costs a fraction of what it did.New2026-11-22
- 1.1.0-canary.20The Place Editor is 0.16.0: Roswaal Benchmark 1, and the CPU's part of a frame in the profile.New2026-11-22
- 1.1.0-canary.19The Place Editor is 0.15.0: Highlight instances are drawn, as Studio draws them.New2026-11-22
- 1.1.0-canary.18The Place Editor is 0.14.0: orbiting far out no longer redraws the near sky maps every frame.New2026-11-22
- 1.1.0-canary.17The Place Editor is 0.13.0: no quality level multisamples, and the near sky maps' thin parts are taken out in compute.New2026-11-22
- 1.1.0-canary.16The Place Editor is 0.12.0: the profile times multisampling with one draw, and says what a sky map redraw costs.New2026-11-22
- 1.1.0-canary.15The Place Editor is 0.11.0: dragging the camera is lighter at the higher levels, and the profile's GPU times can be trusted on Safari.New2026-11-22
- 1.1.0-canary.14The Place Editor is 0.10.0: the profile says what each quality level draws, and where its time goes.New2026-11-22
- 1.1.0-canary.13The Place Editor is 0.9.1: Apple's GPUs draw the parts' depth first again, as it measured faster.New2026-11-22
- 1.1.0-canary.12The Place Editor is 0.9.0: lighter work for Apple's GPUs, a half size glow at the lower levels, and half precision where the device has it.New2026-11-22
- 1.1.0-canary.11The Place Editor is 0.8.0: render scale is a share of the page's own pixels, and Native draws a Retina screen's every pixel.New2026-11-22
- 1.1.0-canary.10The Place Editor is 0.7.0: antialiasing by FXAA, SMAA, MSAA 2×, 4× or 8×, or still-frame TAA, chosen in the Rendering panel.New2026-11-22
- 1.1.0-canary.9The Place Editor is 0.6.0: Metal, Glass and Reflectance reflect the place round them, and a dark Sky dims what is in its shade less.New2026-11-22
- 1.1.0-canary.8The Place Editor is 0.5.0: the sun's shadows reach as far as Studio's at each quality level, and the profile measures every level.New2026-11-22
- 1.1.0-canary.7The Place Editor is 0.4.0: quality levels, Automatic and Level 1 to 21, as Studio's.New2026-11-22
- 1.1.0-canary.6The Place Editor is 0.3.0: antialiasing can be turned off, and the profile measures it.New2026-11-22
- 1.1.0-canary.5The Place Editor's shader is smaller on WebGPU, for a tablet's GPU.New2026-11-21
- 1.1.0-canary.4The Place Editor draws faster on a tablet: a shader for the switches in use, and cheaper sky shadows.New2026-11-21
- 1.1.0-canary.3The Place Editor is 0.2.0: a deeper profile, and a render scale.New2026-11-21
- 1.1.0-canary.2Rendering, Performance and Mesh Debug open on a tablet.New2026-11-21
- 1.1.0-canary.1The Performance panel profiles the frame stage by stage, on any device.New2026-11-21
Added
- 1.1.0-canary.22Compare with last run and Compare with a file at the end of a benchmark, and Compare two results in Settings › Scene view: each station's change before and after the run's drift, and whether it is past the noise.
- 1.1.0-canary.22Each station twice, in Settings › Scene view: a second pass over the stations, so each has its own noise. Twice as long.
- 1.1.0-canary.22The last five runs are kept in this browser, to compare a new run with.
- 1.1.0-canary.20Roswaal Benchmark 1: thirteen test scenes Roswaal makes for itself, the same on every device, each timed on the GPU and the CPU, still and while the camera orbits. Current settings or a full sweep of every quality level. From Settings › Scene view, or the Rendering panel's Profile.
- 1.1.0-canary.20The editor hidden while it runs: the Roswaal logo or Esc stops it; at the end, its score, Copy report and Download results.
- 1.1.0-canary.20The page's own work a frame in the profile: effects, culling and the rest.
- 1.1.0-canary.19Highlights: a Highlight's FillColor over the parts it covers and a 2 pixel OutlineColor line round them, over what is in front with DepthMode AlwaysOnTop, where they are seen with Occluded. A Highlight covers its Adornee, or its parent, and every part in it; parts with a Transparency are left out, as in Studio. With WebGPU.
- 1.1.0-canary.19The Rendering panel's Highlights switch, under Post effects.
- 1.1.0-canary.19Transparent parts show Highlight, a Roswaal fix in the Rendering panel, off unless chosen: parts with a Transparency keep their Highlight, fully transparent ones too, for carousels and scene renders.
- 1.1.0-canary.16The profile's MSAA 4×, one draw row: multisampling with the parts shaded and depth-tested in one draw.
- 1.1.0-canary.16The sky maps' redraw in three stages: the maps, the thin parts taken out of the near ones, and the lighting cells.
- 1.1.0-canary.15The profile's Camera moving rows: an orbit, a pan, a pinch and each touch stick, with the GPU's stages and what was drawn again.
- 1.1.0-canary.15The GPU's own time beside every row of the profile, where it has timers.
- 1.1.0-canary.14Each quality level's stages in the profile, with what the level drew at: the canvas, antialiasing, the sun's map and reach, the glow's size, draw calls and the switches it adds.
- 1.1.0-canary.14The GPU's own time for each stage where it has timers, beside the waited times.
- 1.1.0-canary.14The level, antialiasing and camera the profile began from, at the top of the report, so two profiles can be taken from the same spot.
- 1.1.0-canary.12The profile's Depth path rows: one frame with the parts' depth drawn first, and one with them shaded and depth-tested in one draw.
- 1.1.0-canary.12The profile's Shader precision rows, where the device has half precision.
- 1.1.0-canary.11Native in Render scale: every pixel the screen has, twice as many each way on a Retina screen.
- 1.1.0-canary.10Antialiasing modes: Off, FXAA, SMAA, MSAA 2×, 4× and 8×, and Still-frame TAA, in Settings › Scene view and in the Rendering panel. Each renderer offers what it draws: WebGPU has MSAA 4× only, WebGL2 as many samples as the GPU has.
- 1.1.0-canary.10Still-frame TAA: once the view is still it draws 16 frames a fraction of a pixel apart and averages them. While beams or particles move, it keeps a running average.
- 1.1.0-canary.10The profile's antialiasing rows time every mode this device draws.
- 1.1.0-canary.9Scene reflections, a Rendering switch under Sky reflections, on from Quality Level 19: Metal, Glass and Reflectance show the place round the camera, drawn into a small cube again as the camera moves. A metal shows it blurred, in its own colour.
- 1.1.0-canary.8The profile's quality levels: one frame at each level, 1 to 21, with the level's own render scale and antialiasing. The view goes back to its own level after.
- 1.1.0-canary.7Quality in Settings › Scene view and at the top of the Rendering panel's View: Automatic, or Level 1 to Level 21. A level sets the switches, how far parts are drawn, how far the sun's shadows reach and their maps' size, and the render scale and antialiasing where those are Automatic.
- 1.1.0-canary.7Render distance: parts past a level's distance are not drawn, from 500 studs at Level 1 to every part from Level 17, as measured in Studio.
- 1.1.0-canary.7Automatic starts from the device, a phone at Level 5, a tablet at 10, a laptop's built-in GPU at 15 and other computers at 21, then moves a level down after two seconds of slow frames and up after five of fast ones.
- 1.1.0-canary.7Soft sun shadows below Level 10, from a small blurred map, where Studio draws soft shadows without a shadow map.
- 1.1.0-canary.6Antialiasing in Settings › Scene view: 4×, the default, or Off, one sample a pixel. The view is made again when it changes.
- 1.1.0-canary.6The profile's antialiasing rows: one frame with the view built at one sample a pixel and at four.
- 1.1.0-canary.3Render scale in Settings › Scene view: the place drawn at 100%, 75% or 50% of the screen's pixels across and down. Automatic is 75% on a touch screen and 100% elsewhere.
- 1.1.0-canary.3The profile's base: with every feature off, the frame with nothing drawn, the parts' depth alone (WebGPU), and the parts shaded.
- 1.1.0-canary.3Light and Shadows, each off alone: each switch of those groups turned off by itself, and what the frame saves without it.
- 1.1.0-canary.1Profile this view, in the Place Editor's Performance panel: the frame rate on screen, one frame waited for, each stage of the frame timed with the GPU waited for at its end, the Rendering panel's steps added one at a time, and the frame at a half and a quarter of the pixels. It works where the browser cannot time the GPU, as Safari on an iPad cannot.
- 1.1.0-canary.1Copy report puts the whole profile, with the renderer, the GPU's name and the canvas size, on the clipboard as text.
Changed
- 1.1.0-canary.29A MeshPart with DoubleSided on is drawn from behind too, in both renderers, as Studio draws it: a single sheet, such as a tank's side skirt, no longer disappears when seen from its back.
- 1.1.0-canary.29Roswaal Benchmark 4 is Benchmark 3 with the tanks' skirts and tracks DoubleSided, as their models have them. Its scores do not compare with Benchmark 3's.
- 1.1.0-canary.29The Place Editor is 0.22.0.
- 1.1.0-canary.28Occlusion culling starts off on Apple's GPUs at every quality level. Measured on an iPad, it cost 0.7 to 2.6 ms at almost every benchmark station and saved nothing at any. It can still be turned on in the Rendering panel.
- 1.1.0-canary.28Each station twice is now Warm pass. Scores and comparisons come from the first pass, and the report shows how much slower each station was once the device had warmed up.
- 1.1.0-canary.28The Place Editor is 0.21.0.
- 1.1.0-canary.27A/B a switch, in Settings › Scene view, measures every benchmark station with one Rendering panel switch on, off, on and off, back to back, and says what the switch saves or costs at each.
- 1.1.0-canary.27The benchmark draws with the Rendering panel's switches, where it drew with every switch on. Its report names any that are off.
- 1.1.0-canary.27Decals and Textures are mipmapped in WebGPU, as in WebGL2: a far face no longer sparkles, and its image costs less to draw.
- 1.1.0-canary.27The Place Editor is 0.20.0.
- 1.1.0-canary.26Roswaal Benchmark 3 adds two stations. Meshes draws 96 tanks as 1,788 MeshParts, Teensy Tiny Tankery models by MayLizbeth ("extraclear") under CC BY 4.0. Textures puts Kenney's prototype textures, CC0, on every face of a wall of blocks. Its scores do not compare with Benchmark 2's.
- 1.1.0-canary.26The benchmark carries its own models and textures, fetched when a run first needs them. They are never asked of Roblox, and no sign-in is needed.
- 1.1.0-canary.26Roswaal reads binary glTF (.glb) files: their meshes, with positions, normals and texture coordinates, for the benchmark's tanks.
- 1.1.0-canary.26The Place Editor is 0.19.0.
- 1.1.0-canary.25Benchmark 2's times are the mean of each set's middle 80%, not its median, so they fall between a clock's steps: Safari counts in whole milliseconds, and a fast GPU's timer in steps of about 0.067 ms.
- 1.1.0-canary.25Comparing runs of two different benchmarks now says they cannot be compared, rather than giving a drift and noise for scenes measured differently.
- 1.1.0-canary.25The Place Editor is 0.18.1.
- 1.1.0-canary.24Roswaal Benchmark 2 draws Benchmark 1's scenes with two frames in flight, the next always queued, rather than one at a time. An iPad's GPU slowed itself in the gaps, so 1 light and 100 took the same time, and an empty scene 7.7 ms in one pass and 13.8 ms in the next. Its scores do not compare with Benchmark 1's.
- 1.1.0-canary.24Its report gives the time between frames, rather than a frame waited for, beside the GPU's own time.
- 1.1.0-canary.24The camera moves by the clock in a benchmark and a profile: each motion runs for one second at the same speed on every device. It moved a set step each frame, so a GPU drawing 280 frames a second spun it four times as fast as an iPad.
- 1.1.0-canary.24The Place Editor is 0.18.0.
- 1.1.0-canary.23A benchmark comparison's noise band is three deviations, not two, and a run measured once is taken to be as noisy as the other run's two passes, the two noises added. Comparing two iPad runs where nothing drawn had changed, two of eighteen stations were called changed; now none are.
- 1.1.0-canary.23The Place Editor is 0.17.1.
- 1.1.0-canary.22The Place Editor is 0.17.0.
- 1.1.0-canary.21A Highlight's outline is found in two short passes, along each row and then up and down, rather than by every pixel searching the square round it. The same outline; on an iPad's screen, 18 reads a pixel rather than 81.
- 1.1.0-canary.21The Place Editor is 0.16.1.
- 1.1.0-canary.20The Place Editor is 0.16.0.
- 1.1.0-canary.19The Place Editor is 0.15.0.
- 1.1.0-canary.18The near sky maps follow a moving camera a share a frame: two maps a frame with their thin parts, then the lighting cells in two halves, into a second set that is read once complete. A place or sun change still redraws them at once.
- 1.1.0-canary.18Apple's GPUs take the near maps' thin parts out in four render passes again: in compute it measured slower on an iPad.
- 1.1.0-canary.18The Place Editor is 0.14.0.
- 1.1.0-canary.17No quality level turns on MSAA: SMAA from Level 13 to 21. MSAA is chosen in Settings' Antialiasing.
- 1.1.0-canary.17The near sky maps' thin parts are taken out in one compute pass a map, rather than four render passes. The picture is the same.
- 1.1.0-canary.17The Place Editor is 0.13.0.
- 1.1.0-canary.16The Place Editor is 0.12.0.
- 1.1.0-canary.15The reflection cube is drawn a face a frame, from one place, and read once all six are done. An orbit drew all six, and their smaller levels, every frame.
- 1.1.0-canary.15The lighting cells are found in two steps, eight slices a pass: each cell's own share of the sky once, then the average round it. The same cells, with a 27th of the samples, where the browser allows it.
- 1.1.0-canary.15The reflection cube is no longer drawn again when only the near sky maps move.
- 1.1.0-canary.15The Place Editor is 0.11.0.
- 1.1.0-canary.14The profile's steps add only the switches the view has on, so the last step is the view as set.
- 1.1.0-canary.14The sun's maps are drawn every frame while the stages are profiled, as when the camera moves.
- 1.1.0-canary.14The Place Editor is 0.10.0.
- 1.1.0-canary.13Every GPU draws the parts' depth first again. On an iPad the one-draw path measured 9 ms a frame to the pre-pass's 6. The profile's Depth path rows still time both.
- 1.1.0-canary.13The Place Editor is 0.9.1.
- 1.1.0-canary.12On Apple's GPUs the parts are shaded and depth-tested in one draw, and occlusion's depth is drawn small: a tile-based GPU hides what is behind before it shades. Other GPUs draw the parts' depth first, as before.
- 1.1.0-canary.12Neon's glow is found at half the view's size at Quality Levels 6 to 12, where it is drawn at one sample a pixel.
- 1.1.0-canary.12The colour arithmetic runs in half precision with WebGPU where the device has it: the tone curve and the lights' sums. The picture is the same.
- 1.1.0-canary.12A few powers in the shaders are multiplications, and an image's tint is worked out once a corner rather than once a pixel.
- 1.1.0-canary.12The Place Editor is 0.9.0.
- 1.1.0-canary.11Render scale is a share of the page's own pixels, before a Retina screen doubles them. Quality Levels 10 to 17 draw at 100% of them, a quarter of an iPad's pixels, and Native from Level 18. A screen with one pixel to the page's draws as before.
- 1.1.0-canary.11The profile times still-frame TAA and moving beams and particles alone: their own frames wait while it runs.
- 1.1.0-canary.11The Place Editor is 0.8.0.
- 1.1.0-canary.10Quality levels antialias by a pass first: FXAA at Levels 10 to 12, SMAA at 13 to 17, MSAA 4× from 18, as a tablet pays most for MSAA.
- 1.1.0-canary.10SMAA uses the reference implementation's tables, under its MIT licence, now in Settings › Licences and the attributions.
- 1.1.0-canary.10The Place Editor is 0.7.0.
- 1.1.0-canary.9Metal is lit as Studio's is: less of its colour's own light, and more of what it reflects, fitted to Studio's captures of a Metal block on a lit floor.
- 1.1.0-canary.9Reflections show a Sky's own images where it has them, so a dark space Sky is dark in a metal too.
- 1.1.0-canary.9Under a Sky of six images, the shade is darker, as Studio's captures of a floor in shadow under open sky show.
- 1.1.0-canary.9The Place Editor is 0.6.0.
- 1.1.0-canary.8The sun's sharp shadows reach as far as Studio's at each quality level, from about 90 studs at Level 10 to 578 from Level 19, as measured in Studio. Parts far above still cast them, as they do in Studio.
- 1.1.0-canary.8Below Level 10 the blurred shadows reach further, as Studio's soft shadows do without a shadow map.
- 1.1.0-canary.8Level 15 is named Level 15 in the Rendering panel's View.
- 1.1.0-canary.8The Place Editor is 0.5.0.
- 1.1.0-canary.7The Rendering panel's performance presets are the quality levels. Level 15 has Fast (iPad)'s switches, and Level 21 is As Studio. A switch changed by hand shows Custom (from Level N).
- 1.1.0-canary.7Render scale and Antialiasing are Automatic by default, the quality level's. Antialiasing is a new setting, so a choice made in canary.6 is not kept.
- 1.1.0-canary.7The Place Editor is 0.4.0.
- 1.1.0-canary.6The sky's shadow is read in one loop over its sixteen maps, and materials' grain and patterns are left out of a place with none, as one of Plastic and SmoothPlastic is. The picture is unchanged.
- 1.1.0-canary.6The Place Editor is 0.3.0.
- 1.1.0-canary.5The parts' shader leaves out what the place has none of: the lights' code where it has no PointLight, SpotLight or SurfaceLight, and Neon's and CrackedLava's where it has neither. The picture is unchanged.
- 1.1.0-canary.5The sun's shadow is read in one place rather than once a cascade, and the far shadow's four taps in a loop. The picture is unchanged.
- 1.1.0-canary.5The Place Editor is 0.2.2.
- 1.1.0-canary.4The parts are shaded by a shader built for the Rendering panel's switches as they are, with the code for what is off left out. It is built the first time a set of switches is used, and kept; the picture is unchanged.
- 1.1.0-canary.4Sky shadows read the lighting cells first, and the sky's maps only where the cells' edge needs them. The picture is unchanged.
- 1.1.0-canary.4The Place Editor is 0.2.1.
- 1.1.0-canary.3The Place Editor is 0.2.0.
- 1.1.0-canary.3The profile's report names the render scale, and a GPU whose browser gives one word for its vendor, architecture and description once.
Fixed
- 1.1.0-canary.18The reflection cube is drawn again once the near sky maps have moved, so reflections are not left shaded by maps the camera has left.
- 1.1.0-canary.15The GPU's timers no longer count overlapping passes twice: on Safari, Glow, bloom and post read longer than the whole frame. Automatic reads the same times.
- 1.1.0-canary.14The report's Antialiasing names the mode drawn (FXAA, SMAA), not only its samples.
- 1.1.0-canary.4The profile's report rounds the pixel ratio.
- 1.1.0-canary.2Rendering, Performance and Mesh Debug open in the right-hand drawer on an iPad or a phone. Opened from the Panels menu there, they dimmed the view and showed nothing.
1.0.xRoswaal 1.0: graphs can have child scripts, node maps are graphs, and packages keep themselves synced.SecurityNew2026-11-210.265.xPlace edits wait for Save; the place viewer shows its assets loading.New2026-11-170.264.xParts drag onto surfaces in the place viewer; thin walls let the sky in as Studio's do.New2026-11-170.263.xThe Rendering panel's View is one dropdown and every switch works in every view; Neon under a beam no longer washes out.New2026-11-17